Heat and Sweep Canton Fireplace and Barbecue Website Logo

A Step-by-Step guide to lighting your gas fireplace

Lighting a gas fireplace can be intimidating, especially if you’ve never done it before. This step-by-step guide will walk you through the entire process from start to finish, ensuring that your gas fireplace is lit safely and efficiently. Learn how to light your gas fireplace today with this comprehensive guide!

heat and sweep gas fireplace hearth optimized

How to light your gas fireplace

If you have a gas fireplace, you know how convenient and easy they are to use. But what do you need to light a gas fireplace? Reaching out to a qualified professional is always your best option, but if you plan to do it yourself, here is a step-by-step guide to lighting your gas fireplace:

1. Make sure that the gas valve is turned to the “off” position.

2. Locate the pilot light. This is usually a small knob or lever near the bottom of the fireplace.

3. Turn the knob or lever to the “on” position. You may hear a clicking sound as the gas ignites.

4. Use a long match or lighter to ignite the gas at the pilot light opening. Hold the flame to the opening for about 30 seconds before releasing it.

5. If the pilot light goes out, repeat steps 2-3 until it stays lit.

6. Once the pilot light is lit, turn on the main burner switch (this is usually a larger knob or lever above the pilot light). The flame should now be visible in front of the gas logs.

6. Close the access panel and enjoy your fire!

heat and sweep cozy socks in front of fireplace optimized

Safety Tips for Lighting a Gas Fireplace

When lighting a gas fireplace, always use extreme caution. Make sure that the area around the fireplace is clear of any flammable materials before proceeding. In addition, never leave the gas fireplace unattended while it is lit. Here are some other safety tips to keep in mind:

  • Use a long match or lighter to ignite the gas at the pilot light opening. Do not use anything that can create a spark, such as a regular lighter.
  • Do not try to light the gas fireplace if there is an odor of gas. This could indicate a gas leak, which can be extremely dangerous. If you smell gas, immediately open a window and call your gas company.
  • Monitor the flame closely after igniting it. If it starts to flicker or go out, turn off the gas immediately and call a professional to service your fireplace.

Troubleshooting Common Problems with Lighting

If your gas fireplace isn’t lighting, there are a few things you can check before calling a professional. Make sure the pilot light is on—if it’s not, follow the manufacturer’s instructions for relighting it. If the pilot light is on but the fireplace still won’t light, check to see if the gas valve is turned to the “on” position. If it is, try opening and closing the valve slightly to see if that gets the gas flowing.

If your fireplace lights but then goes out shortly after, there are a few possible causes. One is that the flue isn’t open—so be sure to open it before lighting the fire. Another possibility is that there’s something blocking the airflow into the fireplace. So take a look and see if there’s anything blocking the grates or vents. If not, then it could be that the damper isn’t fully open— so give it a good push to make sure it’s all the way open.

If your fire burns for awhile and then starts to smoke, that usually means there’s not enough air flow. So again, check to see if there’s anything blocking the vents or grates. If not, then you may need to adjust the damper to get more air flowing into the fireplace.

Heat and Sweep Canton Fireplace and Bbq exterior image of the store


Lighting your gas fireplace can be intimidating, but following these step-by-step instructions will make the process easier so you can enjoy the warmth of your gas fireplace in no time. Always use caution when dealing with a burning fire and always follow safety guidelines to keep yourself and those around you safe. If you have any hesitation at all in doing it yourself, call a qualified fireplace expert to help you.

Enjoying a cozy night around your new or existing gas fireplace is something that all homeowners should experience at least once, so don’t hesitate to light up that flame!


More Posts

Welcome to our new website!

Welcome to our new website. You may notice we’ve made some changes to the design and user experience of our website. We’d love to get

Get an Estimate